THE SHORT ANSWER
Check your model’s outage instructions, clock and regeneration status. Some controls retain settings, while an interrupted cycle may require attention; do not reset everything by default.
Separate loss of power from a water-safety event
A power interruption does not by itself describe the safety of the incoming water. Check your actual utility’s notices or, for a well, whether the well and pump need attention. If floodwater or damage is involved, follow the health department’s directions instead of treating a control reset as the entire response.
Record the outage duration and whether the softener was regenerating when it began. Photograph any flashing time, error or unfamiliar display after power returns.
Read what this control remembers
GE’s power-outage guidance describes retained settings and a clock that may need correction after an extended interruption. It also discusses drain flow if power fails during regeneration. Those details are specific to its supported equipment; memory periods and restart behavior vary.
Reference: GE Appliances softener outage memory
Check the clock before changing the program
Compare the displayed time with the real local time and use the manual’s clock-setting procedure if needed. Do not overwrite hardness, capacity or other established settings simply because the screen flashed. Keep a photo of the original settings with the manual.
If drainage persists, water is leaking or the controls do not respond normally, contact the installer. Use a bypass only according to the exact instructions and when you can safely identify it. Bypassed water is outside the softener’s treatment path.
Close the loop after restart
Ask how to confirm that any interrupted cycle finished and whether a hardness check is needed. Do not force repeated regenerations without a reason and model-specific guidance. Record any corrective steps and restore the intended operating position as instructed.
For a seasonal home near Venice or Englewood, add the clock and control status to the caretaker’s report after an outage. This is separate from the drinking-water system’s own restart procedure. Confirm compatible service and appointment availability before booking.
A PRACTICAL NEXT STEP
Water softening, explained.
Reduce hardness minerals and the scale they can leave behind.
Explore this solution