THE SHORT ANSWER
Compare where and when the odor occurs, including hot versus cold water, then have the source investigated. An odor pattern helps direct the next check but cannot diagnose water safety or specify a filter.
Record the pattern before replacing equipment
Write down which fixtures are affected, whether the odor occurs with hot water, cold water or both, and whether it changes after ordinary use. Note recent plumbing, heater or treatment work and the first date you noticed the change. Record observations without deliberately exposing yourself to a strong gas odor.
If you use city water, check current provider notices and report a sudden change. If you use a well, include the well and existing treatment records. A neighbor’s similar description is context, not proof of the same cause.
Why the hot-cold distinction helps
Minnesota Department of Health describes hydrogen sulfide and sulfur-bacteria sources in groundwater, wells, plumbing and water heaters. It uses hot-cold observations to help direct an investigation. An odor confined to hot water warrants a water-heater discussion; it does not prove that buying a whole-home carbon system is the right response.
Reference: Minnesota Department of Health sulfur-odor guidance
Keep the investigation safe
Do not enter a well pit, enclosed well house or other confined area to follow the smell. The same health-department guidance warns that hydrogen sulfide can be hazardous in air at high levels. Strong or unexplained gas odors require an appropriate safety response, not a smell test in an enclosed space.
Leave heater inspection, anode decisions and disinfection to the appropriate qualified professional. Do not raise water-heater temperature or add chemicals from a generic internet recipe. Ask how any proposed work affects safety, equipment protection and the manufacturer’s instructions.
Do not use odor as a drinking-water clearance
The smell alone does not determine whether water meets drinking-water criteria. For a well, discuss appropriate bacteria, nitrate and concern-specific testing with the health department or laboratory. If contamination is suspected, follow official water-use precautions while the investigation proceeds.
Ask a proposed treatment provider to identify the confirmed issue and explain why the selected process addresses it. Keep source correction, equipment sanitation and ongoing filtration as separate questions; they may require different actions.
Send a useful request for help
Include a short fixture map, hot-cold observations, equipment labels, service dates and any lab results. Ask who should inspect the heater or well and what would verify a successful correction. Record whether the odor returns after the work rather than masking it with repeated unsupervised chemical treatment.
This checklist applies to individual homes around North Port, Englewood and Arcadia without implying a regional sulfur problem. Pure Harbor’s treatment scope, compatibility and coverage must be confirmed; this guide does not establish a diagnosis or promise a particular repair.
If you're on a private well in Sarasota or Charlotte County
Private wells are common here. FL DOH counts 7,961 known and 11,587 likely private-well parcels in Sarasota County (2023), and Charlotte County estimates about 5,300.
FL DOH says the rotten-egg odor is hydrogen sulfide, and odor only in hot water points to the water heater. We found no countywide sulfide data, so a lab test is the next step.
Will a softener fix the smell? Usually not on its own.
Reference: FL DOH: well water odor and staining
A PRACTICAL NEXT STEP
Well-water planning, explained.
Build a treatment plan around your well, your concerns, and appropriate testing.
Explore this solution