THE SHORT ANSWER
Florida's secondary drinking water standards cover 14 things that mostly affect taste, smell, color, staining and scale, not health at those levels: aluminum, chloride, copper, fluoride, iron, manganese, silver, sulfate, zinc, color, odor, pH, total dissolved solids (TDS) and foaming agents (F.A.C. 62-550.320 and Table 6). Key limits include iron 0.3 mg/L, manganese 0.05 mg/L, sulfate 250 mg/L, chloride 250 mg/L and TDS 500 mg/L. EPA treats these as non-enforceable guidelines, but Florida's rule says a community water system is in violation if any secondary contaminant except pH exceeds its limit at a sampling point (62-550.520(3)). The standards apply to community water systems, not private wells, though they're a useful yardstick for well test results.
FAQ (quick)
- Are secondary contaminants dangerous? EPA says they "are not considered to present a risk to human health at the SMCL."
- Why does Florida enforce them when EPA doesn't? Florida's rule makes an exceedance (except pH) a violation for community water systems. EPA's federal standards are guidelines.
- How often do utilities test? Florida's monitoring table lists one sample every three years at every entry point to the distribution system for community systems.
- Why aren't they in my water quality report? None of the 2025 local reports we reviewed prints a secondary table. EPA suggests asking your utility for its secondary monitoring results.
- Do they apply to my well? No. Florida's rule says the section "applies only to community water systems."
Florida's secondary standards (Table 6), with what you'd notice
| Contaminant | Florida limit (Table 6) | Federal limit (40 CFR 143.3) | What you may notice above the limit (EPA) |
|---|---|---|---|
| Aluminum | 0.2 mg/L | 0.05 to 0.2 mg/L | Colored water |
| Chloride | 250 mg/L | 250 mg/L | Salty taste |
| Color | 15 color units | 15 color units | Visible tint |
| Copper | 1 mg/L | 1.0 mg/L | Metallic taste; blue-green staining |
| Fluoride | 2.0 mg/L | 2.0 mg/L | Tooth discoloration |
| Foaming agents | 0.5 mg/L | 0.5 mg/L | Frothy, cloudy; bitter taste; odor |
| Iron | 0.3 mg/L | 0.3 mg/L | Rusty color; sediment; metallic taste; reddish or orange staining |
| Manganese | 0.05 mg/L | 0.05 mg/L | Black to brown color; black staining; bitter metallic taste |
| Odor | 3 (threshold odor number) | 3 threshold odor number | "Rotten-egg," musty or chemical smell |
| pH | 6.5–8.5 | 6.5–8.5 | Low: bitter metallic taste, corrosion. High: slippery feel, soda taste, deposits |
| Silver | 0.1 mg/L | 0.1 mg/L | Skin discoloration; graying of the white part of the eye |
| Sulfate | 250 mg/L | 250 mg/L | Salty taste |
| Total dissolved solids (TDS) | 500 mg/L | 500 mg/L | Hardness; deposits; colored water; staining; salty taste |
| Zinc | 5 mg/L | 5 mg/L | Metallic taste |
| Corrosivity | Not in Florida's Table 6 | Non-corrosive | Metallic taste; corroded pipes and fixture staining |
Sources: Florida Table 6, Chapter 62-550; 40 CFR 143.3; EPA, Secondary Drinking Water Standards.
mg/L is the same as parts per million (ppm), the unit most local reports use.
How Florida differs from EPA
- Enforcement. EPA says it "does not enforce" secondary limits; they're guidelines for aesthetics. Florida's rule says that, "with the exception of pH, the system is in violation if the level of a secondary contaminant at any sampling point is greater than the secondary maximum contaminant level" (62-550.520(3)).
- Required testing. EPA says that federally, public water systems "only need to test for them on a voluntary basis." Florida requires community water systems to analyze for them "once each compliance period," and its monitoring table lists one sample every three years at every entry point.
- Aluminum. Florida uses a single 0.2 mg/L limit; EPA gives a 0.05 to 0.2 mg/L range.
- Corrosivity. EPA lists it; Florida's Table 6 doesn't.
- Fluoride. Both treat 2.0 mg/L as a secondary limit that triggers public notice. Florida's rule says failing it "requires public notification." Fluoride's separate health-based limit is 4.0 mg/L. More: fluoride in Florida tap water.
- Groundwater. Florida notes these standards "may also apply as ground water quality standards" under Chapter 62-520.
Florida also allows lime softening plants to run above pH 8.5 (up to 9.0 without approval, and up to 10.0 with approval) under conditions in the rule.
Why you won't usually see these in your annual report
In the 2025 reports we reviewed from North Port, Charlotte County Utilities (Peace River and Burnt Store), Englewood Water District, the City of Sarasota, Sarasota County and Arcadia, none includes a secondary-standards table. EPA's advice is to "contact your local public water system," ask "for the list of secondary contaminants which are being monitored in your water supply," and ask how to get a copy of the results. Find your utility: who supplies my drinking water · local report directory.
What this means for well owners
Private wells aren't covered by Florida's secondary rule, but the same limits are a good way to read a lab report. If a result is over:
- Iron or manganese: expect staining (reddish-orange for iron, black for manganese). See rust stains vs. hard-water scale and iron bacteria in Florida well water.
- Odor: EPA ties the odor standard to "rotten-egg," musty or chemical smells. See is sulfur water safe to drink? and sulfur water treatment.
- Color: EPA says color may indicate dissolved organic material or metals. In wells, one possibility is tannins; see tannins in well water.
- TDS, chloride or sulfate: these mean a salty taste. EPA says distillation and reverse osmosis "are effective for removal of chloride, total dissolved solids, and other inorganic substances." See under-sink reverse osmosis and RO installation in North Port. A handheld meter can't tell you which solids are present: TDS meters and drinking water safety.
How these problems are treated
EPA lists the general approaches: aeration "removes odors, iron, and manganese"; coagulation and filtration remove metals like iron, manganese and zinc; granular activated carbon "will remove most of the contaminants which cause odors, color, and foaming"; and distillation and reverse osmosis remove chloride and TDS (EPA). Which one fits your home depends on your test results. See well water solutions and whole-home carbon filtration.
FAQ
Is 0.3 mg/L of iron in tap water a health problem? EPA classifies iron as a secondary contaminant and says secondary contaminants aren't considered a health risk at the SMCL. Above it, EPA lists rusty color, sediment, metallic taste and reddish or orange staining.
What's the TDS limit for drinking water in Florida? 500 mg/L, in Table 6 of Chapter 62-550, the same as EPA's secondary standard.
Is sodium a secondary standard in Florida? No. Sodium is in Florida's Table 1 of primary inorganic limits, at 160 mg/L. See sodium in Florida tap water.
Is hardness a secondary standard? Hardness isn't on Florida's Table 6 or EPA's list. EPA lists hardness as one effect of high TDS. See do you need a water softener in Florida?.
Next step
Have a lab report with numbers over these limits, or stains and odors you can't explain? Schedule an in-home water check, or call 941-294-5767. More: North Port water testing · Whole-home filtration in North Port · North Port service area · Related: radium in Southwest Florida tap water
Sources
Drafted 2026-11-17 (America/New_York). Last fact-checked: 2026-11-17 (America/New_York).
PLANNING A NORTH PORT INSTALLATION?
Turn your questions into a clear scope.
Review the home details, equipment questions and ongoing care to discuss before booking. Address coverage and scheduling are confirmed during your callback.
View the North Port installation guideA PRACTICAL NEXT STEP
Whole-home filtration, explained.
Target chlorine taste and odor with filtration at your home's entry point.
Explore this solution