THE SHORT ANSWER
Under Florida's septic rule, a new septic system must be at least 75 feet from a private drinking water well, 50 feet from a non-potable well (such as an irrigation well) and 100 or 200 feet from a public drinking water well, depending on the size of the facility (F.A.C. 62-6.005). Those distances apply to systems established after the rule took effect, so an older home may have been permitted under earlier rules. Before you close on a home with a well and septic, pull the septic permit record, confirm where both are, and have the well water tested for bacteria and nitrate at a certified lab.
FAQ (quick)
- How far must a septic tank be from a well in Florida? 75 feet from a private potable well for systems built under the current rule.
- Irrigation well? 50 feet from a non-potable well.
- Can the distance ever be shorter? Only in a narrow case: on certain lots platted from 1972 through 1982 that use a performance-based treatment system, the rule keeps "the maximum practicable setback" and never less than 50 feet to a private potable well.
- Who issues septic permits? DEP has run Florida's septic program since July 1, 2021, but county health departments still do the permitting and inspections, according to DEP.
- What should I test the well for? Florida DOH "strongly recommends" testing for bacteria and nitrate at least once a year.
Setback distances in Florida's septic rule
| From the septic system to… | Minimum distance |
|---|---|
| Private potable (drinking) well, or multi-family well | 75 feet |
| Public drinking water well, facility with 2,000 gallons per day or less of sewage | 100 feet |
| Public drinking water well, facility with more than 2,000 gallons per day | 200 feet |
| Non-potable well (for example, irrigation) | 50 feet |
| Surface water bodies (lateral distance) | 75 feet |
| Building foundations, pool walls, property lines (most cases) | 5 feet |
| Potable water lines | 10 feet unless the line is sleeved or schedule 40 PVC or stronger; never within 24 inches |
Source: F.A.C. 62-6.005(1)–(3). The rule also says a septic system can't sit under a building, and that "potable water lines within 5 feet of the drainfield must not be located at an elevation lower than the drainfield absorption surface."
Older lots. For residential lots platted on or after Jan. 1, 1972 but before Jan. 1, 1983 that don't meet today's lot size or density rules, the rule requires either an enhanced nutrient-reducing system that meets all required setbacks or a performance-based treatment system. For the performance-based option, it keeps "the maximum practicable setback" to a private potable well, "and in no case will the setback to a private potable well be reduced below 50 feet." If the home sits on an older platted lot, ask which rule applied when the system was permitted.
Checklist: before you close on a home with a well and septic
- Confirm what the house actually uses. The Florida Water Management Inventory (FLWMI) map shows "the drinking water source (public water or private domestic well) and wastewater treatment method (central sewer or onsite septic) for all developed properties in Florida" (DEP Onsite Sewage Data; FLWMI map). Treat it as a starting point and confirm on site.
- Get the septic permit record. In Charlotte County, DOH-Charlotte uploads completed septic permits to an online records system you can search by address or parcel; instructions are on its OSTDS Permit Lookup page. If you can't find it, DOH-Charlotte says to email Charlotte.EH@FLHealth.gov. In other counties, ask the county health department's environmental health office.
- Find the well on paper too. A well construction permit is required before a well is installed in the Southwest Florida Water Management District, and the District's permit map lets you look up well construction permits. In Sarasota County, the County Health Department issues well construction permits instead (SWFWMD).
- Measure the distance. Compare the septic site plan with the well's location on the ground. If the well is a drinking water well and it looks closer than 75 feet, ask the seller, your inspector and the health department which rule the system was permitted under.
- Look for planned changes. Expanding the house can require an existing septic system permit. DOH-Charlotte says a permit is needed if "the building is expanded," "sewage flow increases" or "sewage characteristics change," and the site plan must show wells, "including public wells within 200 feet" (DOH-Charlotte).
- Test the well water before closing. Florida DOH says "bacteria and nitrate can reach the groundwater and wells through poorly maintained septic systems, livestock areas, and fertilizer application, or as a result of poorly constructed wells," and recommends testing for bacteria and nitrate at least once a year (Florida DOH, Private Wells). See testing a private well after moving and planning a well lab sample.
- Read the results carefully. A positive coliform or a high nitrate result has specific next steps. See positive coliform well test and nitrate in well water: next steps.
Planning water treatment on a septic property
Treatment equipment that discharges water, like a softener or some filters, needs a drain plan that works with the septic system. See have a septic system? check the softener drain plan. For odor, staining or iron from the well itself, see well water treatment in North Port, Port Charlotte well water and sulfur water treatment.
If the home also has city water and an irrigation well, the utility may require a testable backflow preventer at the meter. See backflow testing in North Port and Charlotte County.
FAQ
Does the 75-foot rule apply to my existing home? The rule's distances apply to systems "established after the effective date of the rule." Older systems were permitted under the rules in force at the time. Ask the county health department about a specific property.
Who do I call about a septic problem in Charlotte County? DOH-Charlotte's Environmental Public Health office, 941-624-7200, handles septic complaints and permits in the county.
Who handles well permits in Charlotte County? DOH-Charlotte says people who want to build, repair or abandon a private well in Charlotte County "must contact the Southwest Florida Water Management District."
Does Florida require routine testing of a private well? No. DOH says "the state of Florida does not have requirements for routine private home well water sampling," but recommends yearly bacteria and nitrate tests and lead every three years for most homeowners. DOH also lists Sarasota among counties where the health department enforces local rules on testing newly constructed or repaired wells.
Is a well on a septic property safe to drink? Only a lab test can tell you. See is Florida well water safe to drink?.
Next step
Buying or just moved into a home with a well? Schedule an in-home water check, or call 941-294-5767, and we'll help you plan lab testing and any treatment. More: Well water solutions · North Port water testing · North Port service area · Port Charlotte service area
Sources
Drafted 2026-11-17 (America/New_York). Last fact-checked: 2026-11-17 (America/New_York).
- Florida Administrative Code 62-6.005, Location and Installation (onsite sewage)
- Florida Administrative Code 64E-6.005 (transferred to 62-6.005)
- Florida DEP, Onsite Sewage Program
- Florida DEP, Onsite Sewage Data (FLWMI)
- Florida DOH, Private Wells
- DOH-Charlotte, Onsite Sewage Program
- DOH-Charlotte, OSTDS Permit Lookup
- DOH-Charlotte, Existing System Approval
- DOH-Charlotte, Private Well Water Systems
- Southwest Florida Water Management District, Well Construction Permits
A PRACTICAL NEXT STEP
Well-water planning, explained.
Build a treatment plan around your well, your concerns, and appropriate testing.
Explore this solution